MC35i AT Command Set

MC35i AT Command Set1.4 AT Command Syntax1.4.2 Combining AT commands on the same command lineYou may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefixbefore each command. Instead, it is only needed once at the beginning of the command line. Use a semicolonas command delimiter.The table below lists the AT commands you cannot enter together with other commands on the same line. Otherwise,the responses may not be in the expected order.AT command typeCommentV.250 commands with FAX commands (Prefix AT+F)GSM 7.07 commandswith proprietary commands, Prefix AT^S)GSM 7.05 commands (SMS)To be used standaloneCommands starting with AT&To be used standaloneAT+IPRTo be used standaloneNote: When concatenating AT commands please keep in mind that the sequence of processing may be differentfrom the sequential order of command input. Therefore, if the consecutive order of the issued commands andthe associated responses is your concern, avoid concatenating commands on the same line.MC35i_ATC_V02.00nConfidential / ReleasedPage 17 of 3909/10/08