MC35i AT Command Set

MC35i AT Command Set19. Appendix19. Appendix19.1 Restricted access to SIM data after SIM PIN authenticationThe following commands can be used only after data from the SIM have been read successfully for the first time.Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds dependingon the SIM used. While the read processis in progress, an attempt to use any of the following commands willresult in "+CME Error: 14" (SIM busy).We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowledgesto the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME hascompleted reading data from the SIM card.; ... AT Command not available! ... AT command accessible immediately after PIN entry has returned OK% ... AT command fully accessible after SIM PIN authentication has been completedAT Command Exec Test Read WriteAT+CMGL % ! ; %AT^SMGL % ! ; %AT+CMGR ; ! ; %AT^SMGR ; ! ; %AT+CSCA ; ! % !AT^SSTGI ; % % %AT^SSTR ; % % %AT+CPBR ; % ; %AT+CPBW ; % ; %AT+CPBS ; % % %AT^SDLD % % ; ;AT^SPBC ; % ; %AT^SPBD ; % ; %AT^SPBG ; % ; %AT^SPBS ; % ; %ATD> % ; ; ;MC35i_ATC_V02.00nConfidential / ReleasedPage 362 of 3909/10/08