11.07.2015 Views

MC35i AT Command Set

MC35i AT Command Set

MC35i AT Command Set

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>MC35i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>9.10 <strong>AT</strong>+CLIR9.10 <strong>AT</strong>+CLIR Calling line identification restrictionThis command refers to the GSM supplementary service CLIR (Calling Line Identification Restriction).SyntaxTest <strong>Command</strong><strong>AT</strong>+CLIR=?Response(s)+CLIR: (list of supported s)OKRead <strong>Command</strong><strong>AT</strong>+CLIR?Response(s)+CLIR, OKERROR+CME ERROR: Write <strong>Command</strong><strong>AT</strong>+CLIR=[]Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07 % % % % % ! !Parameter Description (num)Parameter shows the settings for outgoing calls:[0] (P) Presentation indicator is used according to the subscription of the CLIR service1 CLIR invocation2 CLIR suppression (num)Parameter shows the subscriber CLIR service status in the network:0 CLIR not provisioned1 CLIR provisioned in permanent mode2 Unknown (e.g. no network, etc.)3 CLIR temporary mode presentation restricted4 CLIR temporary mode presentation allowedNote• The settings made with <strong>AT</strong>+CLIR=1 or <strong>AT</strong>+CLIR=2 are used for all outgoing calls until the ME is switched offor <strong>AT</strong>+CLIR=0 is used.9/10/08<strong>MC35i</strong>_<strong>AT</strong>C_V02.00nConfidential / ReleasedPage 187 of 390

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!