MC35i AT Command Set

MC35i AT Command Set11.4 AT+FBOR11.4 AT+FBOR Query data Bit OrderThis command queries the bit order for the receive mode. The mode is set by the ME depending on the selectedService Class, see "AT+FCLASS Fax: Select, read or test service class".SyntaxTest CommandAT+FBOR=?Response(s)(list of supported s)OKRead CommandAT+FBOR?Response(s)OKWrite CommandAT+FBOR=Response(s)OKReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastEIA PN-2388 ! % % ! ! ! !Parameter Description (num) 9/10/08bit order modes0 Direct bit order for both Phase C and for Phase B/D data.[1] Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.Note• Used for Fax Class 2 only.MC35i_ATC_V02.00nConfidential / ReleasedPage 228 of 390