MC35i AT Command Set

MC35i AT Command Set10.9 AT+CGSMS10.9 AT+CGSMS Select service for MO SMS messagesSyntaxTest CommandAT+CGSMS=?Response(s)+CGSMS: (list of supported s)OKRead CommandAT+CGSMS?Response(s)+CGSMS: OKWrite CommandAT+CGSMS=[]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07 % % % % % ! !Command DescriptionThe test command is used for requesting information on which services and service preferences can be set byusing the AT+CGSMS write commandThe read command returns the currently selected service or service preference.The write command is used to specify the service or service preference that the MT will use to send MO SMSmessages. If parameter is not given, the current value remains unchanged.Parameter Description (num)A numeric parameter which indicates the service or service preference to be used. Parameter is global for allinterfaces and volatile.0 GPRS1 Circuit switched2 GPRS preferred (use circuit switched SMS transfer if mobile is not GPRSattached)3 (&F)(P) Circuit switched preferred (use GPRS if circuit switched is not available)Note• Sending SMS via GPRS is only possible when mobile is attached using AT+CGATT.9/10/08MC35i_ATC_V02.00nConfidential / ReleasedPage 212 of 390