MC35i AT Command Set

MC35i AT Command Set3.5 ATS183.5 ATS18 Extended call release reportATS18 controls the presentation of extended call release reports for circuit switched fax and data calls. Extendedcall release reports related to voice calls are controlled via AT+CEER.The call release report is presented in numeric format and shows as follows:+CAUSE: :If enabled the message will be reported every time a fax or data call is released or fails to be established.SyntaxRead CommandATS18?Response(s)OKWrite CommandATS18=Response(s)OKERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastV.250 ! % % ! ! ! !Parameter Description (num)(&W)(&V)An odd number enables the presentation of the extended call release report. Any even number disables thisfeature.0 (&F) ...255 (num)Location ID as number code, see also of AT+CEER.Location IDs are listed in Section 3.4.1, Cause Location ID for the extended error report. Each ID is related toanother table that contains a list of s. (num)Reason for last call release as number code (see also of AT+CEER). numbers and the associated descriptions are listed in several tables, sorted by different categoriesat AT+CEER. The tables can be found proceeding from the Location IDs listed in Section 3.4.1, Cause LocationID for the extended error report.9/10/08MC35i_ATC_V02.00nConfidential / ReleasedPage 72 of 390