MC35i AT Command Set

MC35i AT Command Set10.10 AT^SGACT10.10 AT^SGACT Query all PDP context activationsSyntaxTest CommandAT^SGACT=?Response(s)^SGACT: (range of supported s) , (range of supported s)OKRead CommandAT^SGACT?Response(s)[^SGACT: , , ][^SGACT: , , ][^SGACT: ...]OKExec CommandAT^SGACTResponse(s)^SGACT: OKReference(s) PIN ASC0 MUX1 MUX2 MUX3 Last-- % % % % % ! !Command DescriptionThe test command returns supported interfaces and states.The read command lists the activation states for all activated PDP contexts of the ME. Contexts, which are createdinternally by the GPRS modem compatibility commands, will displayed only, if they are activated. The Outputof this command is unsorted.The exec command returns the sum of all activated PDP contexts of the ME.Parameter Description (num)InterfaceIndicates the interface on which a particular PDP context was defined. Every PDP context defined with the commandAT+CGDCONT or internally by the GPRS modem compatibility commands is identified one-to-one by its(local) context identifier and the interface on which it was defined. The range of supported interfaces is returnedby the test command.0 ASC0 or Multiplex channel 11 Multiplex channel 22 Multiplex channel 3 (num) 9/10/08PDP context identifierThe interface local identifier which was used to define a PDP context using the command AT+CGDCONT or whichwas created internally by using the GPRS modem compatibility commands ATD*98# or ATD*99#. The rangeof supported values is returned by the AT+CGDCONT test command. A value of "0" is used by the GPRS modemcompatibility commands ATD*98# or ATD*99# if no context identifier was specified as the command wasinvoked.MC35i_ATC_V02.00nConfidential / ReleasedPage 213 of 390