11.07.2015 Views

MC35i AT Command Set

MC35i AT Command Set

MC35i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MC35i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>2.3 <strong>AT</strong>&W2.3 <strong>AT</strong>&W Stores current configuration to user defined profile<strong>AT</strong>&W stores the currently set parameters to a user defined profile in the non-volatile memory.SyntaxExec <strong>Command</strong><strong>AT</strong>&W[]Response(s)OKERROR/+CME ERROR Reference(s) PIN ASC0 MUX1 MUX2 MUX3 LastV.250 ! % % % % ! !Parameter Description[0] Number of profile (num)Notes• The user defined profile will be restored automatically after power-up. Use <strong>AT</strong>Z to restore user profile and<strong>AT</strong>&F to restore factory settings. Until the first use of <strong>AT</strong>&W, <strong>AT</strong>Z works as <strong>AT</strong>&F.• <strong>AT</strong>&W stores all global settings and the current local settings of the interface, on which the command is executed.• A list of parameters stored to the user profile can be found in Section 19.5, <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>tings storablewith <strong>AT</strong>&W.9/10/08<strong>MC35i</strong>_<strong>AT</strong>C_V02.00nConfidential / ReleasedPage 30 of 390

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!