MC35i AT Command Set

MC35i AT Command Set15.2 AT+CPBR15.2 AT+CPBR Read from PhonebookAT+CPBR serves to read one or more entries from the phonebook selected with AT command AT+CPBS.The AT+CPBR test command returns the location range supported by the current phonebook storage, the maximumlength of field and the maximum length of field.Note: Length information may not be available while SIM storage is selected. If storage does not offer formatinformation, the format list contains empty parenthesizes.The AT+CPBR write command determines the phonebook entry to be displayed with or a locationrange from to . Hence, if no is given only the entry at will be displayed.If no entries are found at the selected location "OK" will be returned.SyntaxTest CommandAT+CPBR=?Response(s)+CPBR: (1-), , OK+CME ERRORWrite CommandAT+CPBR=[, ]Response(s)[+CPBR: , , , ][+CPBR: , , , ]OK+CME ERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07, GSM 11.11 % % % % % ! !Parameter Description (num)The first (lowest) location number within phonebook memory where to start reading. The maximum range supportedby the current phonebook is given in the test command response.If exceeds the upper bound (as indicated by the test command), command willrespond with "+CME ERROR: invalid index". (num)The last (highest) location number within phonebook memory where to stop reading. The maximum range supportedby the current phonebook is given in the test command response.If both and are in the range indicated by the test command parameter ,the list of entries will be output and terminated with "OK".If exceeds the range indicated by the test command parameter , the list of entries willbe output but terminated with "+CME ERROR: invalid index". (str) 9/10/08Phone number in format specified by , it may be an empty string.MC35i_ATC_V02.00nConfidential / ReleasedPage 304 of 390