11.07.2015 Views

MC35i AT Command Set

MC35i AT Command Set

MC35i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MC35i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>12.2 <strong>AT</strong>+CMGC12.2 <strong>AT</strong>+CMGC Send an SMS commandSyntaxTest <strong>Command</strong><strong>AT</strong>+CMGC=?Response(s)OKWrite <strong>Command</strong>If text mode (see <strong>AT</strong>+CMGF=1)<strong>AT</strong>+CMGC=, [, [, [, [, ]]]] Text can be entered /Response(s)+CMGC: [, ]If sending failsERROR+CMS ERRORWrite <strong>Command</strong>If PDU mode (see <strong>AT</strong>+CMGF=0)<strong>AT</strong>+CMGC= PDU can be entered /Response(s)+CMGC: [, ]OKIf sending failsERROR+CMS ERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.05 % % % % % ! !Notes• After invoking the commands <strong>AT</strong>+CMGW, <strong>AT</strong>+CMGS or <strong>AT</strong>+CMGC it is necessary to wait for the prompt ">"before entering text or PDU. After the prompt a timer will be started to observe the input.• At baudrates below 19200 it is recommended to use the line termination character only (refer to <strong>AT</strong>S3, default) before entering the text or PDU. Use of the line termination character followed by the response formattingcharacter (refer to <strong>AT</strong>S4, default can cause problems<strong>MC35i</strong>_<strong>AT</strong>C_V02.00nConfidential / ReleasedPage 257 of 3909/10/08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!