11.07.2015 Views

MC35i AT Command Set

MC35i AT Command Set

MC35i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MC35i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong>3.2 <strong>AT</strong>+CIND<strong>AT</strong>+CIND?+CIND: 5,99,1,0,0,0,0,0OK<strong>AT</strong>+CMER=2,0,0,2OK+CIEV: battchg,5+CIEV: signal,99+CIEV: service,1+CIEV: sounder,0+CIEV: message,0+CIEV: call,0+CIEV: roam,0+CIEV: smsfull,0+CIEV: rssi,5<strong>AT</strong>D0123456;OK+CIEV: sounder,1+CIEV: call,1+CIEV: sounder,0+CIEV: call,0NO CARRIER<strong>AT</strong>+CIND=,,,0,,0OK<strong>AT</strong>D0123456;OKNO CARRIERThe battery is either full or no battery is connected to the ME. The biterror rate of the signal quality is not available (since there is no call inprogress). The ME is registered to its home network.Now activate the Indicator Event Report with <strong>AT</strong>+CMER.Full receive signal strength.Make a call.A set of "+CIEV" URCs is received.Called party hangs up.Deregister the indicators "sounder" and "call".Dial the same call.This time, no URCs are displayed.Called party hangs up.EXAMPLE 2Deactivation of indicator "sounder" via <strong>AT</strong>+CIND<strong>AT</strong>+CIND?Query the current status of indicators.+CIND: 5,99,1,0,1,0,0,0,4OK<strong>AT</strong>+CIND=,,,0To deactivate indicator "sounder" (= fourth item in list of indicators).OKEXAMPLE 3Deactivation of indicator "sounder" via <strong>AT</strong>^SIND<strong>AT</strong>^SIND="sounder",0 To deactivate indicator "sounder".^SIND: sounder,0,0OK<strong>MC35i</strong>_<strong>AT</strong>C_V02.00nConfidential / ReleasedPage 59 of 3909/10/08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!