MC35i AT Command Set

MC35i AT Command Set13.2 AT^SCKS13.2 AT^SCKS Query SIM and Chip Card Holder StatusThis command controls the SIM connection presentation mode and queries the connection status of the SIM andthe card holder tray of the MC35i.SyntaxTest CommandAT^SCKS=?Response(s)^SCKS:(list of supported s)OKRead CommandAT^SCKS?Response(s)^SCKS: , OKERROR+CME ERROR: Write CommandAT^SCKS=Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 Last-- ! % % % % ! !Unsolicited Result Code^SCKS: During startup, and if the MC35i's SIM connection status has changed an unsolicited result code (URC) is issued.Command DescriptionThe read command returns the URC presentation mode and the status of the SIM card connection.The write command enables or disables the presentation of URCs to report whether or not the SIM card is connected.If the ME is powered down or reset (AT+CFUN or AT^SMSO) the current presentation mode setting willnot be retained. Therefore the setting =1 needs to be restored after power on the MC35i or may be savedin the user profile (AT&W).Parameter Description (num)(&W)(&V)0 (&F) Suppress unsolicited result codes1 Output unsolicited result codes (num)(&V) 9/10/080 Card holder tray removed or SIM connection error1 SIM inserted(refer to note)MC35i_ATC_V02.00nConfidential / ReleasedPage 293 of 390