MC35i AT Command Set

MC35i AT Command Set2.13 AT^SCFG2.13 AT^SCFG Extended Configuration SettingsAT^SCFG can be used to query and configure various settings of the MC35i.The AT^SCFG read command returns a list of all supported parameters and their current values.The AT^SCFG write command queries a configuration parameter (if no value is entered) or sets its value(s).Input of parameter names is always coded in GSM character set, parameter values are expected to be given asspecified via AT+CSCS.The following error messages may be returned by the AT^SCFG write commands:• "+CME ERROR: operation temporary not allowed"Change of parameter value(s) temporarily not allowed.• "+CME ERROR: invalid index"Invalid parameter name or value(s).• "+CME ERROR: invalid characters in text string"Character set conversion of parameter value(s) failed.• "+CME ERROR: memory failure"Could not allocate necessary memory or storing a parameter failed.• "+CME ERROR: operation not allowed"Change of parameter value(s) not allowed• "+CME ERROR: unknown"Other errorSyntaxTest CommandAT^SCFG=?Response(s)^SCFG: "AutoExec" , (list of supported ), (list of supported ), (list ofsupported ), (list of supported ), (max. string length of), (time range of )^SCFG: "Call/SpeechVersion1", (list of supported s)^SCFG: "Radio/Band", (list of supported s)OKRead CommandAT^SCFG?Response(s)^SCFG: "AutoExec" , , , , ,[, , ]^SCFG: "Call/SpeechVersion1", ^SCFG: "Radio/Band", OKWrite CommandAutomatic AT command executionAT^SCFG="AutoExec" , , , [, ,[, ]]Response(s)^SCFG: "AutoExec" , , , , ,[, , ]OKERROR+CME ERRORMC35i_ATC_V02.00nConfidential / ReleasedPage 48 of 3909/10/08