MC35i AT Command Set

MC35i AT Command Set7.18 AT+CBST7.18 AT+CBST Select bearer service typeThe AT+CBST write command selects the bearer service , the data rate and the connectionelement to be used when data calls are originated. The settings also apply to mobile terminated data calls,especially when single numbering scheme calls or calls from analog devices are received (see AT+CSNS). SeeGSM 02.02[1] for a list of allowed combinations of subparameters.SyntaxTest CommandAT+CBST=?Response(s)+CBST: (list of supporteds), (list of supporteds), (list of supporteds)OKRead CommandAT+CBST?Response(s)+CBST: , , OKWrite CommandAT+CBST=[, [, ]]Response(s)OKERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07 ! % % ! ! ! !Parameter Description (num)(&W)(&V)0 Autobauding4 2400 bps (V.22bis)6 4800 bps (V.32)[7] (&F) 9600 bps (V.32)14 14400 bps (V.34)68 2400 bps (V.110)70 4800 bps (V.110)71 9600 bps (V.110)75 14400 bps (V.110) (num)(&W)0 (&F) Asynchronous modem (num)(&W)Transparent mode is not supported.1 (&F) Non-transparent9/10/08MC35i_ATC_V02.00nConfidential / ReleasedPage 136 of 390