MC35i AT Command Set

MC35i AT Command Set11.1 FAX parameters (num)Page Width[0] 1728 pixels in 215mm1 2048 pixels in 255 mm2 2432 pixels in 303 mm3 1216 pixels in 151 mm4 864 pixels in 107 mmNote• The host application is not required to support all values of the parameters listed above. Depending on theapplication design it may be sufficient to implement only the default values. See T.31, T.32 and EIA PN-2388specifications for further advice.11.1.1 Summary of Fax Class 2 URCs defined by EIA PN-2388The following URCs are messages indicated in communication only. The URCs are not user definable.Table 11.1: Summary of Fax Class 2 URCs defined by EIA PN-2388URC+FCON+FCSI: +FDCS: , , , , ,, , +FDIS: , , , , , ,, +FET: +FHNG: +FNSF: ""+FPTS: ""+FTSI: ""MeaningIndicates connection with a fax machine.Reports the remote ID, called station ID.Reports current session parameters (refer to EIA PN-2388, Table3.10).Reports the remote station capabilities (refer to EIA PN-2388,Table 3.10).Post page message. Indicates whether or not further pages ordocuments are pending.Reports that call has been terminated and indicates status.Reports non-standard setup frame.Reports the status of received pages.Reports the remote ID, transmit station ID.MC35i_ATC_V02.00nConfidential / ReleasedPage 225 of 3909/10/08