MC35i AT Command Set

MC35i AT Command Set17.4 AT^SCTM17.4 AT^SCTM Set critical operating temperature presentation modeor query temperatureUse this command to monitor the temperature range of the module. The write command enables or disables thepresentation of URCs to report critical temperature limits.CAUTION: During a guard period of two minutes after power-up, the module will not switch off, even if the criticaltemperature limit is exceeded. This allows the user to issue emergency calls, or calls to a predefined before the module switches off.During this guard period, the module operates in an automatic report mode: URCs can be always displayedregardless of the selected mode . Refer to Section 17.4.1, Deferred shutdown for detail.SyntaxTest CommandAT^SCTM=?Response(s)^SCTM:(list of supported s)[, (range of in Celsius)]OKRead CommandAT^SCTM?Response(s)^SCTM: , [, ][, ]OKERROR+CME ERRORWrite CommandAT^SCTM=[, [, ]]Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 Last-- ! % % % % % !Unsolicited Result CodeURCs will be automatically sent to the TA when the temperature reaches or exceeds the critical level, or when itis back to normal.^SCTM_B: for module (board) temperatureCommand DescriptionThe read command returns:• the URC presentation mode• information about the current temperature range of the module• The board temperature in Celsius if parameter =1.• The predefined , if defined. If is not defined, the parameter will be leftout.MC35i_ATC_V02.00nConfidential / ReleasedPage 353 of 3909/10/08