Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting<br />
Resetting the<br />
<strong>Analyzer</strong><br />
Thermo Scientific <strong>Orion</strong> <strong>2117HL</strong> <strong>High</strong> <strong>Level</strong> <strong>Chloride</strong> <strong>Analyzer</strong> <strong>User</strong> <strong>Guide</strong><br />
The Thermo Scientific <strong>Orion</strong> <strong>2117HL</strong> chloride analyzer allows the user to<br />
reset the analyzer through the setup mode or by a hard reset. Resetting the<br />
analyzer will restore all settings in the setup mode to factory default values.<br />
Warning: Resetting the analyzer will erase all data logs including<br />
calibration, and password protection settings for setup and calibration.<br />
The analyzer will reset setup parameters to factory default settings.<br />
Operator Action Scrolling<br />
Marquee<br />
Press in the measure mode<br />
to enter the setup mode<br />
Press / until RSET<br />
appears in the marquee<br />
Press to reset the analyzer<br />
Press<br />
Press<br />
Press<br />
When the reset is complete, the<br />
system will return to the measure<br />
mode. The operator will need<br />
to re-enter the setup mode to<br />
continue programming the setup<br />
parameters. Press to return<br />
to the setup mode.<br />
Last menu used<br />
in setup mode<br />
RSET<br />
(flashing)<br />
PRESS TEST<br />
VIEW ENTER TO<br />
RESET<br />
PRESS TEST<br />
VIEW ENTER TO<br />
RESET<br />
Main<br />
Display<br />
SEL<br />
SCrn<br />
SEL<br />
SCrn<br />
rSEt<br />
?<br />
rSEt<br />
?<br />
Notes<br />
SETUP appears<br />
as mode<br />
This command<br />
resets all<br />
previously set<br />
parameters to<br />
factory default<br />
values. Use this<br />
command only to<br />
set the analyzer<br />
to original<br />
factory setup<br />
values.<br />
VI-17