Orion 2117HL High Level Chloride Analyzer User Guide

Analyzer Operation
Default Operator Action Scrolling Marquee Main Display Notes
4-20
LOg
mAMP
Press to set the analog output
Press / to scroll between
4-20 and 0-20
Press to accept the setting and
advance to the next screen
Press / to scroll between
LOg and LIn
Press to accept the setting and
advance to the next screen
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
mAMP
(flashing)
SEL
SCrn
SELECT 0-20 OR 4-20 4-20 or 0-20
SELECT LOG OR
LINEAR OUTPUT
1 ppb mA SENSOR OUTPUT
LOW VALUE
Press to move the decimal point
Press / to set the first digit
Press to move to the next digit
Press / to set the values of
the remaining digits and press to
move through the remaining digits
Press to accept the setting and
advance to the next screen
mA SENSOR OUTPUT
LOW VALUE
100 ppb mA SENSOR OUTPUT
HIGH VALUE
Press to move the decimal point
Press / to set the first digit
Press to move to the next digit
Press / to set the values of
the remaining digits and press to
move through the remaining digits
Press to accept the setting and
advance to the next screen
mA SENSOR OUTPUT
HIGH VALUE
(flashing)
SOUt
LOg or LIn
(flashing)
LO
# # # . #
(first digit flashing)
LO
# # #. #
(change flashing digit)
HI
# # # . #
(first digit flashing)
HI
# # #. #
(change flashing digit)
SEL CH1 or SEL
CH2 on main
display of two
channel analyzer
III-25