Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix<br />
Sample Conditions<br />
Thermo Scientific <strong>Orion</strong> <strong>2117HL</strong> <strong>High</strong> <strong>Level</strong> <strong>Chloride</strong> <strong>Analyzer</strong> <strong>User</strong> <strong>Guide</strong><br />
Temperature 5 to 35 °C<br />
Total Alkalinity Less than 50 ppm CaCO 3<br />
Sulfite Sulfite cannot be present in the sample<br />
Inlet Pressure 8 to 100 psig<br />
Flow Rate 40 mL/minute nominal set by pressure regulator<br />
Sample Inlet 1/4” NPTF tube fitting<br />
Sample Drain 3/4” NPT male<br />
Grab Sampler Optional<br />
Display Features<br />
Type Custom backlit LCD<br />
Size 54 x 76 mm (2 1/8 in x 3 in)<br />
Marquee Temperature, operator prompts<br />
Middle Line Concentration, error codes<br />
Lower Line mV (selectable)<br />
Text Display Scrolling marquee for English language instructions<br />
on setup, calibration and diagnostics<br />
Calibration<br />
DKA Calibration Yes<br />
DKA Calibration Points 3 points<br />
Offline Calibration Yes<br />
Offline Calibration Points 1 point<br />
Pre-programmed Standard Values Yes<br />
Custom Calibration Programmable for concentration and volume<br />
Operator Input DKA, operator programmable, offline<br />
Inputs (Potentiometric)<br />
Ion Input <strong>Chloride</strong><br />
Reference Input Reference<br />
A-4
Change language