Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Orion 2117HL High Level Chloride Analyzer User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Analyzer</strong> Operation<br />
Warning: The reset command will erase all operator settings, logs and calibration data. The analyzer will<br />
need to be set up and calibrated again before it can resume operation.<br />
Default Operator Action Scrolling Marquee Main Display Notes<br />
RSET<br />
Press to reset the analyzer<br />
To Reset the <strong>Analyzer</strong>:<br />
Press<br />
Press<br />
Press<br />
When the reset is complete, the system<br />
will return to the measure mode. The<br />
operator will need to re-enter the setup<br />
mode to continue programming the setup<br />
parameters. Press to return to the<br />
setup mode.<br />
To Abort the Reset:<br />
Press to return to the main<br />
setup mode<br />
Press to scroll to the next menu<br />
Thermo Scientific <strong>Orion</strong> <strong>2117HL</strong> <strong>High</strong> <strong>Level</strong> <strong>Chloride</strong> <strong>Analyzer</strong> <strong>User</strong> <strong>Guide</strong><br />
RSET<br />
(flashing)<br />
PUSH TEST VIEW ENTER<br />
TO RESET<br />
PUSH TEST VIEW ENTER<br />
TO RESET<br />
PRESS TEST VIEW ENTER<br />
TO RESET<br />
RSET<br />
(flashing)<br />
Warning: Resetting the analyzer will erase all stored information including relay, logs and<br />
calibration settings.<br />
SEL<br />
SCrn<br />
rSEt<br />
?<br />
rSEt<br />
?<br />
rSEt<br />
?<br />
SEL<br />
SCrn<br />
This command resets<br />
all previously set<br />
parameters to factory<br />
default values. Use<br />
this command only<br />
to set the analyzer to<br />
original factory setup<br />
values.<br />
III-16
Change language