Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands5.2 PC Control Command TableExecute commandItemCF_FSYNC_%1[CR]Set value of Fine SyncCF_TDOTS_%1[CR]Set value of Total DotsCF_CLAMP_%1[CR] Set value of ClampCF_H-POS_%1[CR]Set value of Horizontal PositionCF_V-POS_%1[CR]Set value of Vertical PositionCF_DDOTS_%1[CR] Set value of Display DotsCF_DLINE_%1[CR]Set value of Display LineCF_SETPCADJ_%1[CR] Apply values set in PC Adjust menu to screen imageCF_ORGMODE_%1[CR] Specify the original signal for the selected PC modeCF_PCSTORE_%1[CR] Store current setting values in PC Adjust menu to Mode %1CF_PCMODEFREE_%1 [CR] Delete the values registered in Mode %1 and return it to Free status.5.3 Input Control Command TableExecute commandItemCF_INPUT_%1[CR] Select InputCF_SOURCE_%1[CR] Select Source of selected InputCF_INPUT1_%1[CR] Select Input1 and also set input source to %1CF_INPUT2_%1[CR] Select Input2 and also set input source to %1CF_INPUT3_%1[CR] Select Input3 and also set input source to %1CF_INPUT4_%1[CR] Select Input4 and also set input source to %1CF_SYSTEM_%1[CR] Select System in Video Input mode.5.4 Screen Command TableExecute commandCF_SCREEN_%1[CR]CF_DZCENT _%1[CR]CF_KEYSTONE _%1[CR]CF_KYSTNMODE _%1 [CR]CF_CEIL_%1[CR]CF_REAR_%1[CR]CF_VSCALE_%1[CR]CF_VPOS_%1[CR]CF_HSCALE_%1[CR]CF_HPOS_%1[CR]ItemSelect Screen sizeCancel Digital Zoom modeSet Keystone correctionSet Keystone store modeSet ON/OFF of CeilingSet ON/OFF of RearSet V ScaleSet V PositionSet H ScaleSet H Position5-2 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)