Christie LW600 Serial Communications Protocol-Expanded

“?” [CR] - When unknown command is receivedStatus Read Commands9.5.4 CR_V-POS CommandCommandDetail“CR_V-POS” [CR]Get value of Vertical PositionResponse Acceptable “000_%1” [CR]%1 “0000” – “ nnnn”(nnnn = Total Line - Display Area V)Unacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9.5.5 CR_CLAMP CommandCommandDetail“CR_CLAMP” [CR]Get value of ClampResponse Acceptable “000_%1” [CR]%1 “0000” – “ 4095”Unacceptable9.5.6 CR_DDOTS CommandCommandDetail“CR_DDOTS” [CR]Get value of Display DotsResponse Acceptable “000_%1” [CR]“Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received%1 “0256”-”nnnn” (nnnn = Total Dots – Position H)Unacceptable“Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9.5.7 CR_DLINE CommandCommandDetail“CR_DLINE” [CR]Get value of Display LineResponse Acceptable “000_%1” [CR]%1 “0100” – “nnnn”(nnnn = Total Line – Position V)Unacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is receivedLW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-7020-000046-02 Rev 2 (07-2011)