Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.10.17 CR_PJLOCKNOW CommandCommandDetail“CR_PJLOCKNOW” [CR]Get actual setting status of PIN code lockResponse Acceptable “000_%1” [CR]%1 “LOCK” - PJ is locked PIN code lock is set toON1/ON2 on the menu and PJ PIN code is notentered, therefore PJ is actually locked.“FREE” - PJ is unlocked (either A or B) A) PJ lock isset to OFF on the menu B) PJ lock is set to ON1/ON2on the menu, but PIN code Lock mode is canceledbecause PJ PIN code is entered.Unacceptable “Error Code” [CR]9.10.18 CR_PJLOCMENU CommandCommand“CR_PJLOCKMENU” [CR]Detail Get ON/OFF setting status of PIN code lock on menuResponse Acceptable “000_%1” [CR]%1 “ON1” - PIN code lock ON 1 is set on the menu“ON2” - PIN code lock ON 2 is set on the menu“OFF” - PIN code lock OFF is set on the menuUnacceptable “Error Code” [CR]9.10.19 CR_FILH CommandCommand “CR_FILH” [CR]Detail Get Filter used timeResponse Acceptable “000_%1” [CR]%1 “00000 - 99999”Unacceptable “Error Code” [CR]9.10.20 CR_FILCOND CommandCommand “CR_FILCOND” [CR]Detail Get status of filter clogResponse Acceptable “000_%1” [CR]%1 “CLOG” = Filter is clogged“WARN” = Filter is nearly clogged“CLEAN” = Filter is not cloggedUnacceptable “Error Code” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-29020-000046-02 Rev 2 (07-2011)