Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.4.18 CR_IMGGMD CommandCommandDetail“CR_IMGGMD” [CR]Get setting status of Standard/Real/Cinema in Image GammaResponse Acceptable “000_%1” [CR]%1 “STD” - Standard“REL” - Real“CNM” - CinemaUnacceptable “?” [CR]9.5 PC Status Read Commands9.5.1 CR_FSYNC CommandCommandDetail“CR_FSYNC” [CR]Get value of Fine SyncResponse Acceptable “000_%1” [CR]%1 “0000” – “0031”Unacceptable9.5.2 CR_TDOTS CommandCommandDetail“CR_TDOTS” [CR]Get value of Total DotsResponse Acceptable “000_%1” [CR]“Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received%1 “mmmm” – “nnnn”(mmmm = Display area H + Position H)(nnnn = Maximum value less than 140 MHz of DotClock)Unacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9.5.3 CR_H-POS CommandCommandDetail“CR_H-POS” [CR]Get value of Horizontal PositionResponse Acceptable “000_%1” [CR]%1 “0000” – “ nnnn” (nnnn = Total Dots - Display AreaH)Unacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)9-6 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)