Christie LW600 Serial Communications Protocol-Expanded

Status Read CommandsUnacceptable“Error Code” [CR]9.11.2 CR_SIGNAL CommandCommand “CR_SIGNAL” [CR]Detail Get status if there is any signal or notResponse Acceptable “000_%1” [CR]%1 “ON” - There is signal“OFF” - There is no signalUnacceptable “?” [CR]9.11.3 CR_VMUTE CommandCommand “CR_VMUTE” [CR]Detail Get Video mute setting statusResponse Acceptable “000_%1” [CR]%1 “ON” - Video mute is set to ON (Shutter Close).“OFF” - Video mute is set to OFF (Shutter Open).Unacceptable “?” [CR]9.11.4 CR_FREEZE CommandCommand “CR_FREEZE” [CR]Detail Get Freeze setting statusResponse Acceptable “000_%1” [CR]%1 “ON” - Freeze is set to ON.“OFF” - Freeze is set to OFF.Unacceptable “?” [CR]9.11.5 CR_P-TIMER CommandCommand “CR_P-TIMER” [CR]Detail Get Presentation Timer operating statusResponse Acceptable “000_%1” [CR]%1 “ON” - Presentation Timer is ongoing.“STOP” - Presentation Timer is paused.“OFF” - Presentation Timer is not active.Unacceptable “?” [CR]9-32 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)