Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.8 Screen Status Read Commands9.8.1 CR_SCREEN CommandCommandDetail“CR_SCREEN” [CR]Get currently selected screen image sizeResponse Acceptable “000_%1” [CR]%1 “NORMAL” - Normal mode“ZOOM” - Zoom mode“NATURAL” - Natural wide mode“WIDE” - Wide mode“FULL” - Full mode“TRUE” - True mode“CUSTOM” - Custom modeUnacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9.8.2 CR_KYSTNMODE CommandCommandDetail“CR_KYSTNMODE” [CR]Get setting status of Keystone Store ModeResponse Acceptable “000_%1” [CR]%1 “STR” - Store mode is “Store”“RST” - Store mode is “Reset”Unacceptable “?” [CR] - When unknown command is received9.8.3 CR_CEIL CommandCommandDetail“CR_CEIL” [CR]Get setting status of CeilingResponse Acceptable “000_%1” [CR]%1 “ON” - Ceiling projection is enabled“OFF” - Ceiling projection is disabledUnacceptable “Error Code” [CR]9-20 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)