Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands8.7.9 CF_HSCALE CommandCommand%1 “035” - +35“031” - +31:“002” - +2“001” - +1“000” - ±0“‐01” -‐1“CF_HSCALE_%1” [CR]“‐02” -‐2:“‐31” -‐31“‐32” -‐32“UP” - Increment setting value of Hscale by 1“DN” - Decrement setting value of Hscale by 1Detail Set Hscale (Available only in the normal Power ON status)*When selected screen mode is a setting except Custom, theprojector returns “101” [CR] and the command is not executed.*When there is no input signal, the projector returns “101” [CR] andthe command is not executed.Response Acceptable “000” [CR]Unacceptable“Error Code” [CR]8-22 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)