Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.4.11 CR_OFFSET-G CommandCommandDetail“CR_OFFSET-G” [CR]Get user controlled Green value of OffsetResponse Acceptable “000_%1” [CR]%1 “000” – “063”Unacceptable“?” [CR]9.4.12 CR_OFFSET-B CommandCommandDetail“CR_OFFSET-B” [CR]Get user controlled Blue value of OffsetResponse Acceptable “000_%1” [CR]%1 “000” – “063”Unacceptable“?” [CR]9.4.13 CR_SHARP CommandCommandDetail“CR_SHARP” [CR]Get user controlled value of SharpnessResponse Acceptable “000_%1” [CR]%1 “000” – “031”Unacceptable“?” [CR]9.4.14 CR_GAMMA CommandCommandDetail“CR_GAMMA” [CR]Get user controlled value of GammaResponse Acceptable “000_%1” [CR]%1 “000” – “015”Unacceptable“?” [CR]9.4.15 CR_NZRED CommandCommandDetail“CR_NZRED” [CR]Get Noise Reduction setting statusResponse Acceptable “000_%1” [CR]%1 “ON” - Noise Reduction is ON“OFF” - Noise Reduction is OFFUnacceptable “Error Code” [CR] -When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9-4 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)