Christie LW600 Serial Communications Protocol-Expanded

More documents

Recommendations

Info

Status Read Commands8.9.18 CF_KEYDIS CommandCommand“CF_KEYDIS_%1” [CR]%1 “NONE” - RC & KEY are valid“RC” - RC is invalid“KEY” - KEY is invalidDetail Set the limitation of RC/KEY use (valid only when in the normalPower ON status).Response Acceptable “000” [CR]Unacceptable“Error Code” [CR]8.9.19 CF_SHUTRCPROT CommandCommand“CF_SHUTRCPROT_%1” [CR]%1 “ON” - Disable RC key from controlling Shutter (Protection On)“OFF” - Enable RC key to control Shutter (Protection Off)Detail Set valid/invalid of RC use on Shutter control function (valid onlywhen in the normal Power ON status).Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.9.20 CF_SHUTKEYPROT CommandCommand“CF_SHUTKEYPROT_%1” [CR]%1 “ON” - Disable key on the top panel from controlling Shutter(Protection On)“OFF” - Enable key on the top panel to control Shutter (ProtectionOff)Detail Set valid/invalid use of key on the top panel on Shutter controlfunction (valid only when in the normal Power ON status).Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.9.21 CF_SHUTH CommandCommand“CF_SHUTH_%1” [CR]%1 “005”-“180”-Specify setting time directly“UP” - Add 1 minute“DN” -Decrease 1 minuteDetail Set time of operating shutter management function (valid only whenin the normal Power ON status)The status set by this command is stored in EEPROM, and thesetting remains effective even after the power is turned to ALL OFFstatus.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8-32 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)
Status Read Commands8.10 Other Command8.10.1 CF_SHUTTER CommandCommand“CF_SHUTTER_%1” [CR]%1 “OPEN”- Open Shutter“CLOSE” - Close ShutterDetail Control OPEN/CLOSE of Shutter (valid only when in the normalPower ON status).Response Acceptable “000” [CR]Unacceptable“Error Code” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 8-33020-000046-02 Rev 2 (07-2011)
Page 1:
LW600-LX900-LX1000 RS232Codes-Expan
Page 9: Table of Contents10.2.2 Command pip
Page 13: Status Read Commands2 Serial Interf
Page 17: Status Read Commands4 NotationData
Page 20 and 21: Status Read Commands5.2 PC Control
Page 23 and 24: Status Read Commands6 Status Read C
Page 25 and 26: Status Read Commands6.6 Lamp Status
Page 27: Status Read Commands7 Error Code Ta
Page 30 and 31: Status Read Commands8.3 Operation R
Page 32 and 33: Status Read Commands8.4.7 CF_APCTRL
Page 34 and 35: Status Read Commands8.4.13 CF_NZRED
Page 36 and 37: Status Read Commands8.4.16 CF_IMAGE
Page 38 and 39: Status Read Commands8.5.4 CF_V-POS
Page 40 and 41: Status Read Commands8.5.8 CF_SETPCA
Page 42 and 43: Status Read Commands8.6 Input Contr
Page 44 and 45: Status Read CommandsCommand“CF_SY
Page 46 and 47: Status Read Commands8.7.2 CF_DZCENT
Page 48 and 49: Status Read Commands8.7.7 CF_VSCALE
Page 50 and 51: Status Read Commands8.7.9 CF_HSCALE
Page 52 and 53: Status Read Commands8.8.2 CF_LAMPMO
Page 54 and 55: Status Read Commands8.9.3 CF_BACKGN
Page 56 and 57: Status Read Commands8.9.6 CF_RCODE
Page 58 and 59: Status Read Commands8.9.11 CF_PJPIN
Page 63 and 64: Status Read Commands9 Status Read C
Page 65 and 66: Status Read Commands9.4.6 CR_COLTEM
Page 67 and 68: Status Read Commands9.4.16 CR_PROGV
Page 69 and 70: “?” [CR] - When unknown command
Page 71 and 72: Status Read Commands9.5.8 CR_SETPCA
Page 73 and 74: Status Read Commands9.5.10 CR_PCSTO
Page 75 and 76: Status Read Commands9.7.3 CR_SYSTEM
Page 77 and 78: Status Read Commands%1 “DIGITAL
Page 79 and 80: Status Read Commands9.7.9 CR_NMSLOT
Page 81 and 82: Status Read Commands9.7.14 CR_IDSLO
Page 83 and 84: Status Read Commands9.8.4 CR_REAR C
Page 85 and 86: Status Read Commands9.9.4 CR_LAMPST
Page 87 and 88: Status Read Commands9.10.2 CR_DISP
Page 89 and 90: Status Read Commands9.10.9 CR_P-MAN
Page 91 and 92: Status Read Commands9.10.17 CR_PJLO
Page 93 and 94: Status Read Commands9.10.24 CR_TEST
Page 95 and 96: Status Read Commands9.11.6 CR_TEMPW
Page 97: Status Read Commands9.11.9 CR_SHUTC
Page 100 and 101: Status Read Commands10.2 Functional
show all

Christie LW600 Serial Communications Protocol-Expanded

Create successful ePaper yourself

Delete template?

Save as template?