Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.4.16 CR_PROGV CommandCommandDetail“CR_PROGV” [CR]Get Progressive scan setting statusResponse Acceptable “000_%1” [CR]%1 “ON” - Set Progressive scan On“FILM” - Select FILM mode“OFF” - Set Progressive scan OffUnacceptable “Error Code” [CR] -When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is received9.4.17 CR_IMAGE CommandCommand“CR_IMAGE” [CR]Detail Get image setting status.The Required data “CUSTOM1” – “CUSTOM10” corresponds to“Image1” – “Image10” displayed when selecting Image on OSDMenu.Response Acceptable “000_%1” [CR]%1 “STAND” - Standard“REAL” -Real“CINEMA” - Cinema“CUSTOM1” -“Image1”“CUSTOM2” - “Image2”“CUSTOM3” - “Image3”“CUSTOM4” - “Image4”“CUSTOM5” - “Image5”“CUSTOM6” - “Image6”“CUSTOM7” - “Image7”“CUSTOM8” - “Image8”“CUSTOM9” - “Image9”“CUSTOM10” - “Image10”Unacceptable “Error Code” [CR] - When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is receivedLW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-5020-000046-02 Rev 2 (07-2011)