Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.9.4 CR_LAMPSTS CommandCommandDetail“CR_LAMPSTS” [CR]Get the information of Lamp lighting statusResponse Acceptable “000_%1” [CR]%1 “2**” The first character indicates 2 lamps are usedin this model. The following characters indicateeach lamp status in lamp number order as showedbelow.“I” - Lamp is ON“O” - Lamp is OFF“X” - Lamp Failure e.g.“2IO” - This indicates it is 2-lamps system. Lamp #1is ON, and #2 is OFF.Unacceptable “?” [CR]9.9.5 CR_INFLAMP CommandCommandDetail“CR_INFLAMP” [CR]Get Lamp mode switching statusResponse Acceptable “000_%1” [CR]%1 “NML” - in Normal status (lamp switching operationis not active).“CNG” - during lamp switching operationUnacceptable “?” [CR]9.9.6 CR_PROJH CommandCommandDetail“CR_PROJH” [CR]Get total running time of projector (in hours)Response Acceptable “000_%1” [CR]%1 “0000000” – “0099999”Unacceptable“?” [CR]9.9.7 CR_HMLAMP CommandCommandDetail“CR_HMLAMP” [CR]Get total lamp numberResponse Acceptable “000_%1” [CR]%1 “002”Unacceptable“?” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-23020-000046-02 Rev 2 (07-2011)