Christie LW600 Serial Communications Protocol-Expanded

Status Read CommandsCommand“CR_SYSTEM” [CR]selected*Error Code“101” [CR] is returned for nosignal.Input isY,Pb/Cb,Pr/CrInput is Videoor S-videoUnacceptable“AUTO” - indicates Auto is selected“1080I” - indicates 1080i60Hz is selected“1035I” - indicates 1035i is selected“720P” - indicates 720p is selected“575P” - indicates 575p is selected“480P” - indicates 480p is selected“575I” - indicates 575i is selected“480I” - indicates 480i is selected*Selected System is returned, whether or notsignal is coming.“AUTO” - indicates Auto is selected“NTSC” - indicates NTSC is selected“NTSC443” - indicates NTSC4.43 is selected“PAL” - indicates PAL is selected“SECAM” - indicates SECAM is selected“PAL-M” - indicates PAL-M is selected“PAL-N” - indicates PAL-N is selected*Selected System is returned, whether or notsignal is coming.“Error Code” [CR]9.7.4 CR_SRCINP1 CommandCommand “CR_SRCINP1” [CR]Detail Get Source of Input1Response Acceptable “000_%1” [CR]9-14 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)