Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands8.4.15 CF_IMAGE CommandCommand“CF_IMAGE__%1” [CR]%1 “STAND” - Standard (Image adjustment value is set to factorydefault)“REAL” - Real (Fixed value to display graphic image with naturaltone)“CINEMA” - Cinema (Fixed value to focus on tone reproduction formovie)“CUSTOM1” - Image1 (values adjusted and stored by user)“CUSTOM2” - Image2 (values adjusted and stored by user)“CUSTOM3” - Image3 (values adjusted and stored by user)“CUSTOM4” - Image4 (values adjusted and stored by user)“CUSTOM5” - Image5 (values adjusted and stored by user)“CUSTOM6” - Image6 (values adjusted and stored by user)“CUSTOM7” - Image7 (values adjusted and stored by user)“CUSTOM8” - Image8 (values adjusted and stored by user)“CUSTOM9” - Image9 (values adjusted and stored by user)“CUSTOM10” -Image10 (values adjusted and stored by user)Detail Select Image mode (valid only when it is in the normal Power ONstatus).Parameter “CUSTOM1” to “CUSTOM10” corresponds to “Image1” to“Image10” displayed in projector OSD menu on selecting Image.The value set by this command is stored in EEPROM so that thesetting can remain effective even after the power is turned to ALLOFF status.Response Acceptable “000” [CR]Unacceptable“Error Code” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 8-7020-000046-02 Rev 2 (07-2011)