Christie LW600 Serial Communications Protocol-Expanded

More documents

Recommendations

Info

Status Read Commands9.10.21 CR_FILREPL CommandCommandDetail“CR_FILREPL” [CR]Get status of Filter cleaning/replacement timeResponse Acceptable “000_%1” [CR]%1 “1Y”-Filter Exchange time is over value of FilterMessage.“1N”-Filter Exchange time is not over value of FilterMessage.Unacceptable “Error Code” [CR]9.10.22 CR_FILTIMER CommandCommandDetail“CR_FILTIMER” [CR]Get time to display Filter cleaning/replacement warning on screenResponse Acceptable “000_%1” [CR]%1 “0400” - Display massage by 400h used.“0700” - Display massage by 700h used.“1000” - Display massage by 1000h used.“OFF” - Off(Warning display is not displayed)Unacceptable “Error Code” [CR]9.10.23 CR_FILREMAIN CommandCommandDetail“CR_FILREMAIN” [CR]Get remaining number of usable Filter scrollResponse Acceptable “000_%1” [CR]%1 “09” = Remaining number of usable Filter scroll : 9times :“00” = Remaining number of usable Filter scroll : 0timeUnacceptable “Error Code” [CR]9-30 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)
Status Read Commands9.10.24 CR_TESTPAT CommandCommand “CR_TESTPAT” [CR]Detail Get setting status of Test patternResponse Acceptable “000_%1” [CR]%1 “COLOR” - Color bar is displayed“GRAD1” - 16step(white→black) is displayed“GRAD2” - 16step(white←black) is displayed“GRAD3” - 16step(white↓black) is displayed“GRAD4” - 16step(white↑black) is displayed“WHITE” - All white is displayed“BLACK” - All black is displayed“CROSS” - Cross is displayed“OFF” -Test pattern display is not displayedUnacceptable “Error Code” [CR]9.11 Other Status Read Commands9.11.1 CR_STATUS CommandCommand“CR_STATUS” [CR]Detail Get operating status of Projector Same as “CR0” in basic commandexcept error code follows it.Response Acceptable “000_%1” [CR]%1 “00” = Power ON“80” = Standby“40” = Countdown in process“20” = Cooling Down in process“10” = Power Failure“28” = Cooling Down in process due to abnormaltemperature“88” =Standby after Cooling Down due to abnormaltemperature“02” = Invalid RS-232C Command“24” = Power Save/Cooling Down in process“04” = Power Save“21” = Cooling Down in process after turned Off dueto lamp failure“81”= Standby after Cooling Down due to lampfailure“2C” = Cooling Down in process after Power Off dueto Shutter management“8C” = Standby after Cooling Down due to ShuttermanagementLW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-31020-000046-02 Rev 2 (07-2011)
Page 1:
LW600-LX900-LX1000 RS232Codes-Expan
Page 9:
Table of Contents10.2.2 Command pip
Page 13:
Status Read Commands2 Serial Interf
Page 17:
Status Read Commands4 NotationData
Page 20 and 21:
Status Read Commands5.2 PC Control
Page 23 and 24:
Status Read Commands6 Status Read C
Page 25 and 26:
Status Read Commands6.6 Lamp Status
Page 27:
Status Read Commands7 Error Code Ta
Page 30 and 31:
Status Read Commands8.3 Operation R
Page 32 and 33:
Status Read Commands8.4.7 CF_APCTRL
Page 34 and 35:
Status Read Commands8.4.13 CF_NZRED
Page 36 and 37:
Status Read Commands8.4.16 CF_IMAGE
Page 38 and 39:
Status Read Commands8.5.4 CF_V-POS
Page 40 and 41:
Status Read Commands8.5.8 CF_SETPCA
Page 42 and 43: Status Read Commands8.6 Input Contr
Page 44 and 45: Status Read CommandsCommand“CF_SY
Page 46 and 47: Status Read Commands8.7.2 CF_DZCENT
Page 48 and 49: Status Read Commands8.7.7 CF_VSCALE
Page 50 and 51: Status Read Commands8.7.9 CF_HSCALE
Page 52 and 53: Status Read Commands8.8.2 CF_LAMPMO
Page 54 and 55: Status Read Commands8.9.3 CF_BACKGN
Page 56 and 57: Status Read Commands8.9.6 CF_RCODE
Page 58 and 59: Status Read Commands8.9.11 CF_PJPIN
Page 60 and 61: Status Read Commands8.9.18 CF_KEYDI
Page 63 and 64: Status Read Commands9 Status Read C
Page 65 and 66: Status Read Commands9.4.6 CR_COLTEM
Page 67 and 68: Status Read Commands9.4.16 CR_PROGV
Page 69 and 70: “?” [CR] - When unknown command
Page 71 and 72: Status Read Commands9.5.8 CR_SETPCA
Page 73 and 74: Status Read Commands9.5.10 CR_PCSTO
Page 75 and 76: Status Read Commands9.7.3 CR_SYSTEM
Page 77 and 78: Status Read Commands%1 “DIGITAL
Page 79 and 80: Status Read Commands9.7.9 CR_NMSLOT
Page 81 and 82: Status Read Commands9.7.14 CR_IDSLO
Page 83 and 84: Status Read Commands9.8.4 CR_REAR C
Page 85 and 86: Status Read Commands9.9.4 CR_LAMPST
Page 87 and 88: Status Read Commands9.10.2 CR_DISP
Page 89 and 90: Status Read Commands9.10.9 CR_P-MAN
Page 91: Status Read Commands9.10.17 CR_PJLO
Page 95 and 96: Status Read Commands9.11.6 CR_TEMPW
Page 97: Status Read Commands9.11.9 CR_SHUTC
Page 100 and 101: Status Read Commands10.2 Functional
show all

Christie LW600 Serial Communications Protocol-Expanded

Create successful ePaper yourself

Delete template?

Save as template?