Christie LW600 Serial Communications Protocol-Expanded

More documents

Recommendations

Info

Status Read Commands5.2 PC Control Command TableExecute commandItemCF_FSYNC_%1[CR]Set value of Fine SyncCF_TDOTS_%1[CR]Set value of Total DotsCF_CLAMP_%1[CR] Set value of ClampCF_H-POS_%1[CR]Set value of Horizontal PositionCF_V-POS_%1[CR]Set value of Vertical PositionCF_DDOTS_%1[CR] Set value of Display DotsCF_DLINE_%1[CR]Set value of Display LineCF_SETPCADJ_%1[CR] Apply values set in PC Adjust menu to screen imageCF_ORGMODE_%1[CR] Specify the original signal for the selected PC modeCF_PCSTORE_%1[CR] Store current setting values in PC Adjust menu to Mode %1CF_PCMODEFREE_%1 [CR] Delete the values registered in Mode %1 and return it to Free status.5.3 Input Control Command TableExecute commandItemCF_INPUT_%1[CR] Select InputCF_SOURCE_%1[CR] Select Source of selected InputCF_INPUT1_%1[CR] Select Input1 and also set input source to %1CF_INPUT2_%1[CR] Select Input2 and also set input source to %1CF_INPUT3_%1[CR] Select Input3 and also set input source to %1CF_INPUT4_%1[CR] Select Input4 and also set input source to %1CF_SYSTEM_%1[CR] Select System in Video Input mode.5.4 Screen Command TableExecute commandCF_SCREEN_%1[CR]CF_DZCENT _%1[CR]CF_KEYSTONE _%1[CR]CF_KYSTNMODE _%1 [CR]CF_CEIL_%1[CR]CF_REAR_%1[CR]CF_VSCALE_%1[CR]CF_VPOS_%1[CR]CF_HSCALE_%1[CR]CF_HPOS_%1[CR]ItemSelect Screen sizeCancel Digital Zoom modeSet Keystone correctionSet Keystone store modeSet ON/OFF of CeilingSet ON/OFF of RearSet V ScaleSet V PositionSet H ScaleSet H Position5-2 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)
Status Read Commands5.5 Lamp Command TableExecute commandCF_LAMPH_%1[CR]CF_LAMPMODE_%1[CR]CF_AUTOLAMPCONTRL_%1[CR]ItemReset total running time for each lampSelect lamp mode (Full/Half)Switch dimmer function levels ofNormal/Auto/Eco5.6 Setting Command TableExecute commandCF_LANG_%1[CR]CF_DISP_%1[CR]CF_BACKGND_%1[CR]CF_LOGO_%1[CR]CF_FANSPEED_%1[CR]CF_RCODE_%1[CR]CF_RSENS_%1[CR]CF_P-MANE_%1[CR]CF_P-MANETIME_%1[CR]CF_ON-STA_%1[CR]CF_PJPINCODE_%1[CR]CF_FILH_%1[CR]CF_FILTIMER_%1[CR]CF_FILCTL_%1[CR]CF_FILSCRL_%1[CR]CF_TESTPAT_%1[CR]CF_KEYDIS_%1[CR]CF_FDEFAULT_%1[CR]CF_SHUTRCPROT_%1[CR]CF_SHUTKEYPROT_%1[CR]CF_SHUTH_%1[CR]CF_SHUTTER_%1[CR]ItemSelect language for OSDSet ON/OFF of On Screen DisplaySelect screen for no signalSet ON/OFF of LogoSelect Fan SpeedSelect Remote Control CodeSelect location of infrared remote receiver ofremote controlSet ON/OFF of Power ManagementSet time of Power ManagementSet ON/OFF of Power ON StartEnter PJ PIN code to cancel PJ lockReset Filter used timeSet time to display Filter cleaning/replacementwarning on screenExecute operation of scroll of filterReset Filter scroll counterSet Test pattern display functionSet limitation of RC/KEY controlReturn the settings to Factory Default statusSet valid/invalid of RC use on Shutter controlfunctionSet valid/invalid use of key on the top panel onShutter control functionSet time of operating shutter managementfunctionControl OPEN/CLOSE of Shutter.LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 5-3020-000046-02 Rev 2 (07-2011)
Page 1: LW600-LX900-LX1000 RS232Codes-Expan
Page 9: Table of Contents10.2.2 Command pip
Page 13: Status Read Commands2 Serial Interf
Page 17: Status Read Commands4 NotationData
Page 23 and 24: Status Read Commands6 Status Read C
Page 25 and 26: Status Read Commands6.6 Lamp Status
Page 27: Status Read Commands7 Error Code Ta
Page 30 and 31: Status Read Commands8.3 Operation R
Page 32 and 33: Status Read Commands8.4.7 CF_APCTRL
Page 34 and 35: Status Read Commands8.4.13 CF_NZRED
Page 36 and 37: Status Read Commands8.4.16 CF_IMAGE
Page 38 and 39: Status Read Commands8.5.4 CF_V-POS
Page 40 and 41: Status Read Commands8.5.8 CF_SETPCA
Page 42 and 43: Status Read Commands8.6 Input Contr
Page 44 and 45: Status Read CommandsCommand“CF_SY
Page 46 and 47: Status Read Commands8.7.2 CF_DZCENT
Page 48 and 49: Status Read Commands8.7.7 CF_VSCALE
Page 50 and 51: Status Read Commands8.7.9 CF_HSCALE
Page 52 and 53: Status Read Commands8.8.2 CF_LAMPMO
Page 54 and 55: Status Read Commands8.9.3 CF_BACKGN
Page 56 and 57: Status Read Commands8.9.6 CF_RCODE
Page 58 and 59: Status Read Commands8.9.11 CF_PJPIN
Page 60 and 61: Status Read Commands8.9.18 CF_KEYDI
Page 63 and 64: Status Read Commands9 Status Read C
Page 65 and 66: Status Read Commands9.4.6 CR_COLTEM
Page 67 and 68: Status Read Commands9.4.16 CR_PROGV
Page 69 and 70: “?” [CR] - When unknown command
Page 71 and 72:
Status Read Commands9.5.8 CR_SETPCA
Page 73 and 74:
Status Read Commands9.5.10 CR_PCSTO
Page 75 and 76:
Status Read Commands9.7.3 CR_SYSTEM
Page 77 and 78:
Status Read Commands%1 “DIGITAL
Page 79 and 80:
Status Read Commands9.7.9 CR_NMSLOT
Page 81 and 82:
Status Read Commands9.7.14 CR_IDSLO
Page 83 and 84:
Status Read Commands9.8.4 CR_REAR C
Page 85 and 86:
Status Read Commands9.9.4 CR_LAMPST
Page 87 and 88:
Status Read Commands9.10.2 CR_DISP
Page 89 and 90:
Status Read Commands9.10.9 CR_P-MAN
Page 91 and 92:
Status Read Commands9.10.17 CR_PJLO
Page 93 and 94:
Status Read Commands9.10.24 CR_TEST
Page 95 and 96:
Status Read Commands9.11.6 CR_TEMPW
Page 97:
Status Read Commands9.11.9 CR_SHUTC
Page 100 and 101:
Status Read Commands10.2 Functional
show all

Christie LW600 Serial Communications Protocol-Expanded

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?