Christie LW600 Serial Communications Protocol-Expanded
Christie LW600 Serial Communications Protocol-Expanded
Christie LW600 Serial Communications Protocol-Expanded
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Status Read Commands8.9.3 CF_BACKGND CommandCommand“CF_BACKGND_%1” [CR]%1 “BLUE” - Select Blue Back“USER” - Select User“BLACK” - Select Black Back“UP” - Switch forward (Blue Back→User→Black Back→Blue Back)“DN” - Switch backward (Blue Back→Black Back→User→Blue Back)Detail Set Screen status for no signal (available only in the normal PowerON status).The status set by this command is stored in EEPROM and the settingremains even after the power is turned to ALL OFF status.*When %1=”USER” is received, the error code “101” is returned, inthe case of Capture failure.Response Acceptable “000” [CR]Unacceptable“Error Code” [CR]8-26 <strong>LW600</strong>-LX900-LX1000 RS232 Codes-<strong>Expanded</strong> Technical Reference Information020-000046-02 Rev 2 (07-2011)