Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.4.2 CR_BRIGHT CommandCommandDetail“CR_BRIGHT” [CR]Get user controlled value of BrightnessResponse Acceptable “000_%1” [CR]%1 “000” – “063”Unacceptable“?” [CR]9.4.3 CR_COLOR CommandCommandDetail“CR_COLOR” [CR]Get user controlled value of ColorResponse Acceptable “000_%1” [CR]%1 “000” – “063”Unacceptable9.4.4 CR_TINT CommandCommandDetail“CR_TINT” CR]“Error Code” [CR] -When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is receivedGet user controlled value of TintResponse Acceptable “000_%1” [CR]%1 “000” – “063”Unacceptable9.4.5 CR_APCTRL CommandCommandDetail“CR_APCTRL” [CR]“Error Code” [CR] -When command is invalid in thegiven condition (such as being selected input)“?” [CR] - When unknown command is receivedGet setting status of Auto Picture ControlResponse Acceptable “000_%1” [CR]%1 “L1” - Operate Auto Picture Control with Level1“L2” - Operate Auto Picture Control with Level2“OFF” - Set Auto Picture Control OFFUnacceptable “?” [CR]9-2 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)