Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands9.5.8 CR_SETPCADJ CommandCommandDetail“CR_SETPCADJ” [CR]Get PC signal for current systemResponse Acceptable “000_%1” [CR]%1 When input signal is PC Analog;“VGA1” - Indicates VGA1 is selected“VGA2” - Indicates VGA2 is selected:“XGA1” - Indicates XGA1 is selected:“WXGA3” - Indicates WXGA3 is selected“1080I” - Indicates 1080i is selected“1035I” - Indicates 10350i is selected“720p” - Indicates 720p is selected“575p” - Indicates 575p is selected“480p” - Indicates 480p is selected“575I” - Indicates 575i is selected“480I” - Indicates 480i is selected“1080psf/24” - Indicates 1080psf/24 is selected“1080psf/25” - Indicates 1080psf/25 is selected“1080psf/30” - Indicates 1080psf/30 is selected :“MODE10” - Indicates Mode10 is selected“EXT11” - EXT11 is selected:“EXT60” - EXT60 is selected*Error Code “101” [CR] is returned for no signal.*When input signal is not PC Analog, error code“101” is returned.Unacceptable “?” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-9020-000046-02 Rev 2 (07-2011)