Christie LW600 Serial Communications Protocol-Expanded

More documents

Recommendations

Info

Status Read Commands9.9.8 CR_LAMPH CommandCommand“CR_LAMPH” [CR]Detail Get Lamp running time (in hours)*return actual lamp running timeResponse Acceptable “000_%1_%2_%3_%4” [CR]%1_%2 %3_%4Unacceptable9.10 Setting Status Read Commands9.10.1 CR_BACKGND CommandCommandDetail“CR_BACKGND” [CR]Lamp 1 data comes first, and then one space, afterthat lamp 2 data is followed.%1 = lamp No.1%2 = lamp No.2%3 = lamp No.3%4 = lamp No.4 ※In the case of 2-lamps model, % 1 and % 2 are onlyused (There are no % 3 and % 4.)Example: “0410_0410_0410_0410” [CR]▪▪▪▪ → Lamp No.1 = 410 HoursLamp No.2 = 410 HoursLamp No.3 = 410 HoursLamp No.4 = 410 HoursNote:• Each bit of data has 4 digits.• “9999” is returned for 10000 hours or more.“Error Code” [CR]Get setting status of Screen for no signalResponse Acceptable “000_%1” [CR]%1 “BLUE” - Blue Back is selected“USER” - User is selected“BLACK” - Black Back is selectedUnacceptable “Error Code” [CR]9-24 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information020-000046-02 Rev 2 (07-2011)
Status Read Commands9.10.2 CR_DISP CommandCommand “CR_DISP” [CR]Detail Get Display setting statusResponse Acceptable “000_%1” [CR]%1 “ON” - Display is set to ON.“CNTDWNOFF” - Display is set to Count down OFF.“OFF” - Display is set to OFF.Unacceptable “?” [CR]9.10.3 CR_LOGO CommandCommand “CR_LOGO” [CR]Detail Get Logo setting statusResponse Acceptable “000_%1” [CR]%1 “DFLT” - Default Logo is enabled“USER” - User is enabled“OFF” - Off is enabledUnacceptable “?” [CR]9.10.4 CR_LOGOLOCK CommandCommand “CR_LOGOLOCK” [CR]Detail Get setting status of Logo Lock functionAcceptable “000_%1” [CR]Response %1 “ON” - Logo Lock is ON“OFF” - Logo Lock is OFFUnacceptable “Error Code” [CR]9.10.5 CR_RCODE CommandCommand“CR_RCODE” [CR]Detail Get currently selected Remote Control codeResponse Acceptable “000_%1” [CR]%1 “001” - Code1“002” - Code2 :“007” - Code7“008” - Code8Unacceptable “?” [CR]LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 9-25020-000046-02 Rev 2 (07-2011)
Page 1:
LW600-LX900-LX1000 RS232Codes-Expan
Page 9:
Table of Contents10.2.2 Command pip
Page 13:
Status Read Commands2 Serial Interf
Page 17:
Status Read Commands4 NotationData
Page 20 and 21:
Status Read Commands5.2 PC Control
Page 23 and 24:
Status Read Commands6 Status Read C
Page 25 and 26:
Status Read Commands6.6 Lamp Status
Page 27:
Status Read Commands7 Error Code Ta
Page 30 and 31:
Status Read Commands8.3 Operation R
Page 32 and 33:
Status Read Commands8.4.7 CF_APCTRL
Page 34 and 35:
Status Read Commands8.4.13 CF_NZRED
Page 36 and 37: Status Read Commands8.4.16 CF_IMAGE
Page 38 and 39: Status Read Commands8.5.4 CF_V-POS
Page 40 and 41: Status Read Commands8.5.8 CF_SETPCA
Page 42 and 43: Status Read Commands8.6 Input Contr
Page 44 and 45: Status Read CommandsCommand“CF_SY
Page 46 and 47: Status Read Commands8.7.2 CF_DZCENT
Page 48 and 49: Status Read Commands8.7.7 CF_VSCALE
Page 50 and 51: Status Read Commands8.7.9 CF_HSCALE
Page 52 and 53: Status Read Commands8.8.2 CF_LAMPMO
Page 54 and 55: Status Read Commands8.9.3 CF_BACKGN
Page 56 and 57: Status Read Commands8.9.6 CF_RCODE
Page 58 and 59: Status Read Commands8.9.11 CF_PJPIN
Page 60 and 61: Status Read Commands8.9.18 CF_KEYDI
Page 63 and 64: Status Read Commands9 Status Read C
Page 65 and 66: Status Read Commands9.4.6 CR_COLTEM
Page 67 and 68: Status Read Commands9.4.16 CR_PROGV
Page 69 and 70: “?” [CR] - When unknown command
Page 71 and 72: Status Read Commands9.5.8 CR_SETPCA
Page 73 and 74: Status Read Commands9.5.10 CR_PCSTO
Page 75 and 76: Status Read Commands9.7.3 CR_SYSTEM
Page 77 and 78: Status Read Commands%1 “DIGITAL
Page 79 and 80: Status Read Commands9.7.9 CR_NMSLOT
Page 81 and 82: Status Read Commands9.7.14 CR_IDSLO
Page 83 and 84: Status Read Commands9.8.4 CR_REAR C
Page 85: Status Read Commands9.9.4 CR_LAMPST
Page 89 and 90: Status Read Commands9.10.9 CR_P-MAN
Page 91 and 92: Status Read Commands9.10.17 CR_PJLO
Page 93 and 94: Status Read Commands9.10.24 CR_TEST
Page 95 and 96: Status Read Commands9.11.6 CR_TEMPW
Page 97: Status Read Commands9.11.9 CR_SHUTC
Page 100 and 101: Status Read Commands10.2 Functional
show all

Christie LW600 Serial Communications Protocol-Expanded

Create successful ePaper yourself

Delete template?

Save as template?