Christie LW600 Serial Communications Protocol-Expanded

Status Read Commands6 Status Read Command Table6.1 Image Status Read Command TableStatus read commandCR_CONT [CR]CR_BRIGHT [CR]CR_COLOR [CR]CR_TINT [CR]CR_APCTRLCR_COLTEMPCR_WBAL-R [CR]CR_WBAL-G [CR]CR_WBAL-B [CR]CR_OFFSET-R [CR]CR_OFFSET-G [CR]CR_OFFSET-B [CR]CR_SHARP [CR]CR_GAMMA [CR]CR_NZRED [CR]CR_PROGV [CR]CR_IMAGE [CR]CR_IMGGMD [CR]ItemGet value of ContrastGet value of BrightnessGet value of ColorGet value of TintGet setting status of Auto Picture ControlGet value of Color temperatureGet Red value of White BalanceGet Green value of White BalanceGet Blue value of White BalanceGet Offset RedGet Offset GreenGet Offset BlueGet value of SharpnessGet value of GammaGet setting status of Noise reductionGet setting status of Progressive scanGet Selected Image statusGet setting value of Image Gamma6.2 PC Status Read Command TableStatus read command ItemCR_FSYNC [CR] Get setting value of Fine SyncCR_TDOTS [CR] Get setting value of Total DotsCR_CLAMP [CR] Get setting value of ClampCR_H-POS [CR] Get setting value of Horizontal PositionCR_V-POS [CR] Get setting value of Vertical PositionCR_DDOTS [CR] Get setting value of Display DotsCR_DLINE [CR] Get setting value of Display LineCR_SETPCADJ [CR] Get currently displayed signalCR_ORGMODE [CR] Get the original signal of the mode adjusted in PC Adj.CR_PCSTORE [CR] Get Free or Stored status for PC Adj. Mode 1-5LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 6-1020-000046-02 Rev 2 (07-2011)