DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Appendix C: Auto Port Forwarding WizardRouter drop-down listEnable Silent ModeRouter IPRouter user name &password35000Search and Auto detectbuttonEnter ports 80 and35000 under Ports2. Under Router IP, click the Detect Router IP button ( ).• The router’s IP populates in the blank field. Click OK to exit the prompt.3. Under Username and Password, enter the router’s username and password.• Optional: Under HTTP Type (default http://) and HTTP Port (default, 80), you may have tochange the values depending on your router model. Consult your router manual for details.Enter your device’s IP35000Enter portnumbers4. Under IP, enter the IP address of your device.NOTE: The IP is usually found in the information window of your NVR.5. Under Port, enter the NVR’s HTTP Port (by default, port 80).6. Under 2nd Port, enter the NVR’s Client Port (by default, port 35000).7. Click Next to continue.93