DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Using the Main Menu• HTTP Port: Used to enable connection tothe system’s web browser interface. Thedefault port number is 80.• UDP Port: Used for special applications.The default port number is 35001.• RTSP Port: Used for special applications.The default port number is 554.You must port forward the TCP (Client) Portand HTTP Ports to enable remote access tothe system.To configure ports:1. Configure the TCP Port (Client), HTTPPort, UDP Port, and RTSP Port fields asneeded.• Under Port, enter the NTP server portnumber.• Under Time Zone, select your time zone.• Under Update Period, enter the intervalyour system will sync the time with theselected server.TIP: Click Manual Update to test the serversettings entered and manually sync the systemtime.5. Click OK. Click Save to save your changes.Configuring DDNSNOTE: Please note that if the HTTP is portis anything other than 80, you must enterhttp:// before the camera’s IP address andcolon (:) and the HTTP port after the IPaddress when connecting using an Internetbrowser (e.g. if the HTTP port is 85, enterhttp://192.168.x.x:85).2. Click Save. The system will restart toupdate the ports used.Configuring NTPYou can sync the system clock with an InternetNTP time server.To sync the system with a time server:1. Click Network Setting.2. Check NTP.3. Double-click NTP to open theconfiguration menu.4. Configure the following:• Under Server IP, enter the IP or DNSaddress of the NTP server.The DDNS Setup window allows you to enteryour Digimerge DDNS settings in the NVR.This step is required for remote access.Prerequisites:• Create a DDNS account. For details, see“Appendix D: Setting Up DDNS Service” onpage 97.• Port forward ports on your router to NVR’sIP address (by default, ports 35000 and 80).• Have your DDNS account name, password,and domain name ready.To configure DDNS settings:1. Click Network Setting.2. Check DDNS.3. Double-click DDNS.4. Ensure Enable is checked. The box will bewhite when DDNS is enabled.5. Under Domain Name, enter the DomainName from the confirmation email youreceived after registering for DDNS.26