DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Appendix F: Hard Drive InstallationAPPENDIX F: HARD DRIVE INSTALLATIONThe system comes with one or more pre-installed 3.5" SATA hard drives. You can install up to twohard drives up to a maximum size of 3TB each (for a maximum total storage of 6TB).Installing a Hard DriveMake sure that the system is OFF and ALL power adapters have beendisconnected before removing/installing the hard drive.To remove the hard drive:1. Power off the system, and unplug all cabling / wiring from the system.2. Pull up on the hard drive door latch to unlock the hard drive compartment.Hard drive door latch3. Pull the hard drive compartment out of the system.4. Place the hard drive upside down on a surface.103