DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Appendix B: Setting up Remote ViewingHow Do I Find My IP and MAC addresses?The IP and MAC address of your system are necessary for DDNS setup. DDNS allows you to viewand control your system from a remote location.To find your IP and MAC address:• Press Enter on the remote control.• Left-click to open the Navigation Bar. Login if prompted. Clickscreen.to open the System InfoIP addressMAC addressClient PortHTTP PortFinding Your External IP AddressIf you wish to find your external IP address, you can use a third-party website such as http://whatismyip.orgYour external IP address can also be found within your Router settings. Refer to your router’s userguide for further details.How Do I Enable Port Forwarding?You need to enable port forwarding on your router to allow for external communications with yoursystem for the following ports:• 80 (HTTP Port)• 35000 (Client Port)Computers, NVRs, and other devices inside your network can only communicate directly with eachother within the internal network. Computers and systems outside your network cannot directlycommunicate with these devices. When a system on the internal network needs to send or receiveinformation from a system outside the network (i.e. from the Internet), the information is sent tothe router.88