DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Appendix E: Remote Firmware Upgrade7. Click Upgrade. Wait for the upgrade to complete. Do not power off the system or disconnectthe power cable during upgrade. The system will restart when the upgrade is complete.Check NVR’sClick Open and select firmware fileClick UpgradeInstalling a Firmware Upgrade Over the InternetPrerequisites:• Port forward the Client Port (default: 35000) on the NVR’s local router.• Obtain the public IP address of the NVR.• Download a firmware upgrade from www.digimerge.com, if one is available. Extract thecontents.To perform a firmware upgrade over the Internet:1. Download the Config Tool from www.digimerge.com.2. Extract the contents into a folder.3. Open the folder and right-click ConfigTool.exe and Run as administrator.4. Click Login.5. Under IP Address, enter the public IP address of the NVR. Edit the User Name, Password, orPort if these have been changed from the default values.Enter the NVR’s publicIP address6. Click Login. The Config Tool logs in to the NVR.7. Click System Upgrade.8. Click Open. select the firmware file (.bin).101