DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Using the Main Menu• Port: Enter the port used by the SMTPserver.• Anonymous: Check if your server supportsanonymous log ins. Otherwise, leave thisunchecked.• User Name: Enter the SMTP user name.• Password: Enter the SMTP password.• Receiver: Enter the email address that willreceive alerts.• Sender: Enter the sender’s email address.• Attachment: Check to include a jpg imageattachment of the camera.• Title: Enter the subject line for emailalerts.• Encrypt Type: Select SSL or TLS if yourserver uses encryption. Select None if yourserver does not use encryption.• Event Interval: Enter the interval betweenalert emails.• Health Enable: Check to enable healthcheck emails. Health check emails will besent periodically to ensure that the systemis functioning normally.• Interval: Enter the interval in minutes forhealth check emails.6. Click Test to send a test email.7. Click OK.8. Click Save to save settings.the internal PoE switch.NOTE: Changing this information from thedefault values may disrupt the connectionto the cameras. Make sure your IP camerasare using DHCP or IP addresses that arecompatible with your selected settings.To configure switch settings:1. Click Network Setting.2. Double-click Switch Settings.3. Configure the IP Address, Subnet Mask,and Gateway for the internal PoE switch.4. Click OK. Click Save to save changes. Thesystem will restart.MotionThe Motion sub-menu allows you to configuresettings for motion detection.Configuring Motion Detection EventsMotion Detection events allow the system tomark footage that has motion. This allows youto quickly locate relevant footage throughSearch. You can also configure systemresponses to motion detection events, such asactivating the system buzzer or sending anemail alert.To configure Motion Detection events:Configuring Switch SettingsYou can configure the networking settings for1. Under Event Type, select Motion Detect.2. Under Channel, select the channel youwould like to configure.3. Check Enable to enable motion detectionon the selected channel.28