DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Mobile Connectivitylive video from the camera that detected motion.Push notificationNOTE: Appearance of notifications may differdepending on the model of your deviceNOTE: Your cameras must have motion detection activated to receive push notifications. Fordetails on enabling motion detection, see “Motion” on page 28.To enable Push Notifications:1. From the Main menu, tap Push Config.NOTE: If Push Config is not shown, tap Add, check Push Config, and then return to the MainMenu.2. Tap the NVR you would like to configure.Select the NVR3. Tap Motion Detect and then check each channel you would like to receive push notificationsfrom.Check channels to enblepush notifications77