DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

More documents

Recommendations

Info

Appendix E: Remote Firmware Upgrade9. Click Upgrade. Wait for the upgrade to complete. Do not power off the system or disconnectthe power cable during upgrade. The system will restart when the upgrade is complete.Click System UpgradeClick Open and select the firmware fileClick Upgrade and select the firmware file102
Appendix F: Hard Drive InstallationAPP<strong>EN</strong>DIX F: HARD DRIVE INSTALLATIONThe system comes with one or more pre-installed 3.5" SATA hard drives. You can install up to twohard drives up to a maximum size of 3TB each (for a maximum total storage of 6TB).Installing a Hard DriveMake sure that the system is OFF and ALL power adapters have beendisconnected before removing/installing the hard drive.To remove the hard drive:1. Power off the system, and unplug all cabling / wiring from the system.2. Pull up on the hard drive door latch to unlock the hard drive compartment.Hard drive door latch3. Pull the hard drive compartment out of the system.4. Place the hard drive upside down on a surface.103
Page 1:
DNR200V SeriesNetwork Video Surveil
Page 4 and 5:
Service13. Servicing - Do not attem
Page 6 and 7:
Features• Easy Connection and set
Page 8:
Updating Firmware . . . . . . . . .
Page 11 and 12:
GETTING STARTEDThe system comes wit
Page 13 and 14:
FRONT PANEL1 23451. IR Receiver: IR
Page 15 and 16:
REMOTE CONTROL1. Power: Press and h
Page 17 and 18:
Using the SystemUSING THE SYSTEMThe
Page 19 and 20:
Using the SystemOR Use Color mode t
Page 21 and 22:
Using the SystemUsing the Virtual K
Page 24 and 25:
Search (Playback)SEARCH (PLAYBACK)S
Page 26 and 27:
BACKUPBackup video files to externa
Page 28 and 29:
Backup2. Start playing back video u
Page 30 and 31:
Using the Main MenuUSING THE MAIN M
Page 32 and 33:
Using the Main Menu2. Copy the firm
Page 34 and 35:
Using the Main MenuRecordingstreami
Page 36 and 37:
Using the Main Menu• HTTP Port: U
Page 38 and 39:
Using the Main Menu• Port: Enter
Page 40 and 41:
Using the Main Menuoptions allow yo
Page 42 and 43:
Using the Main MenuAdvancedConfigur
Page 44 and 45:
Using the Main MenuBackup to use th
Page 46 and 47:
Using the Main MenuModifying Accoun
Page 48 and 49:
Using the Main Menu4. Click Export.
Page 50 and 51:
DigiNet NVR Central Management Soft
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
3. Check Search.Select alarm typeCh
Page 58 and 59:
Page 60 and 61:
• You may also select a task or p
Page 62 and 63: 2. Click on a display area in the m
Page 64 and 65: DigiNet NVR Central Management Soft
Page 66 and 67: 2. Click Search to detect secondary
Page 68 and 69: 7. Click and drag cameras to the di
Page 70 and 71: 5. Click a search result and then c
Page 72 and 73: 5. Tap Add>Manually Add.Tap Add6. C
Page 74 and 75: Mobile ConnectivityUsing Playback M
Page 76 and 77: Mobile Connectivity3. Tap Motion De
Page 78 and 79: Mobile Connectivity6. Configure the
Page 80 and 81: Mobile ConnectivityUsing Playback M
Page 82 and 83: Mobile Connectivity5. Tap OK. A tes
Page 84 and 85: Mobile Connectivity10. Tap + on one
Page 86 and 87: Mobile Connectivity3. Tap + and sel
Page 88 and 89: Mobile Connectivity4. Tap OK. A tes
Page 90 and 91: Mobile Connectivity9. In landscape
Page 92 and 93: Mobile ConnectivityEnabling Push No
Page 94 and 95: Mobile Connectivity2. Tap . Tap OK
Page 96 and 97: Appendix A: System SpecificationsVi
Page 98 and 99: Appendix B: Setting up Remote Viewi
Page 100 and 101: Appendix C: Auto Port Forwarding Wi
Page 108 and 109: Appendix D: Setting Up DDNS Service
Page 110 and 111: Appendix E: Remote Firmware Upgrade
Page 114 and 115: Appendix F: Hard Drive Installation
Page 116 and 117: Appendix F: Hard Drive Installation
Page 118 and 119: Troubleshooting• Hard drive is no
Page 120: Need Help?Please make sure to visit
show all

DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?