DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

2. Click Manual Add.Click Manual Add3. Configure the following:• Title: Enter a name for your NVR of your choice (e.g. home or office).• Type: Select NVR.• Add Type: Select Domain Name.• Domain Name: Enter the Domain Name from the confirmation email after your registered forDDNS, followed by .digimerge.net.• Port: Enter the Client Port (default: 35000).• User: Enter the NVR’s user name (default: admin).• Password: Enter the NVR’s password (default: 000000).Enter name of your choiceSelect NVRtomsmith.digimerge.netSelect Domain nameEnter Domain Name, followed by .digimerge.netEnter TCP Port (default: 35000).Enter User Name (default: admin).Enter Password (default: 000000).4. Click Add, then click OK.5. Click Device List.6. Click + next to No Group.7. Double-click the NVR.43