DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

Using the Main MenuRecordingstreaming to remote users. Check the boxon the far right to enable video streamingto remote users (un-check to hide thechannel from remote users.8. (Optional) To copy settings to otherchannels, click Copy, select channels toapply settings to, and click OK.9. Click OK to save changes.ScheduleThe Recording sub-menu allows you toconfigure image quality settings for therecording stream and sub-stream (usedduring remote connection). Settings for therecording stream are shown on the left, andsub-stream settings are shown on the right.To configure recording quality settings:1. Under Channel, select the channel youwould like to configure.2. Under Type, select the type of recordingyou would like to configure: Regular(continuous recording), MD (motiondetection recording), or Alarm.3. Under Resolution, select the resolution forthe selected recording type. Settingsavailable depend on the model of IPcamera connected.4. Under Frame Rate, select the frame ratefor the selected recording type on the left.Select the frame rate for the sub-streamon the right.5. Under Bit Rate Type, select CBR (ConstantBit Rate) or VBR (Variable Bit Rate) for theselected recording type on the left andsub-stream on the right. If you select VBR,select the Quality from 1 (lowest) to 6(highest).6. Under Bit Rate (Kb/S), select the bit ratefor the selected recording type on the leftand the sub-stream on the right.7. Under Audio/Video, check the box on theleft to enable audio recording (cameramust have microphone attached). Checkthe box in the middle to enable audioThe Schedule sub-menu allows you toconfigure the recording schedule forcontinuous and motion recording. It alsoallows you to configure holiday, pre-recording,and redundancy settings.NOTE: To use motion recording, motiondetection must be enabled for the channel.For details, see “Motion” on page 28.Configuring the Recording Schedule1. Under Channel, select the channel youwould like to configure or select All.2. Under Period, select the day of the weekyou would like to configure, or selectHoliday or All.3. Configure up to 6 separate scheduleperiods.• Configure the start and end time for thetime period on the left.• Check the types of recording that will applyto the time period on the right: Continuous,MD (Motion Detection), Alarm, orMD&Alarm.24